RDM
Hot-air hopper dryer
Hopper-based hot-air drying for plastic pellets before processing.
View details for RDM Hot-air hopper dryerRDC
Dehumidification, drying and material conveying in an RDC resin-preparation arrangement.
The RDC range combines drying and dehumidification for plastics processing. The resin grade and its supplier's drying instructions define the starting requirement: temperature, time and any moisture or drying-air conditions specified for that material.
Send the grade designation or material data sheet. A general polymer name does not establish the drying conditions for every grade, blend or proportion of regrind.
Hourly resin consumption and the required drying time are relevant when reviewing the drying arrangement. Include operating hours, the number of processing machines and how material reaches each machine.
Where a dew-point value is proposed, check its operating and measurement conditions and whether it depends on an option. It should not be treated as an unconditional value for every configuration.
Reference data from RHONG’s published catalogue for the named variants below. Confirm the current specification and options in your quotation.
| Model | Process heater power (kW) |
|---|---|
| RDC-28L/30H | 3 |
| RDC-38L/30H | 4 |
| RDC-38L/50H | 4 |
Only process heater power is shown; it excludes the regeneration heater and blowers. It does not guarantee resin throughput, achieved moisture, dew point or drying time. Select against the actual resin grade and its supplier’s drying recommendations.
Show the feed source, dryer position, receiving hopper and transfer route. Specify whether your inquiry includes conveying equipment or only the drying unit.
A RDM hopper dryer is another drying arrangement to review against the same resin requirements. The resin drying guide explains how to assemble the material, demand and layout details before requesting a quotation.
The RDC combined arrangement incorporates dehumidification, drying and material conveying. Published material describes a conveying package with an additional conveying stage as an option. Show the feed source, drying hopper and receiving machine so the quotation identifies the supplied route and optional components. The cabinet-dryer RCD designation is a separate equipment identity.
The published RDC range lists the dew-point meter as an optional component for monitoring the drying air. A stated dew-point value does not establish that the measuring instrument is included.
Start with actual hourly resin consumption and the grade-specific drying time, then check whether the hopper’s usable material volume and operating conditions support your product…
A resin dryer dew point describes the sampled drying air. A resin moisture test describes a material sample. Both can inform acceptance, but they answer different questions.
Start with the material grade and its supplier's drying instructions. Then match the drying arrangement to material demand and the route to the processing machine.
Send your requirements or questions to RHONG.