Plastic machinery manufacturer
Ningbo, Chinasales@rhongplasticmachinery.com

RG-26G / RG-36G

Central plastic granulator

Central granulation of molding rejects and extrusion scrap, with a split cutting chamber and outboard bearings.

Request a quote WhatsApp

Ask for the specification sheet for your configuration.

Applications

  • Injection and blow-molding rejects
  • Extrusion offcuts
  • Batch collection of plastic scrap

Access to the cutting chamber

The RG-26G and RG-36G ranges process plastic rejects and offcuts collected from molding or extrusion operations. Their published design has a cutting chamber that opens at its middle, with the bearings outside the chamber. This layout gives access to the cutting area when changing blades or cleaning between material batches.

Maintenance access affects the installation as much as the feed opening does. Leave room around the opened hopper and for removal of the screen and collection equipment. A floor plan should show the operator's approach and the route used to move scrap into the machine.

Choose the feed and collection arrangement

Describe whether the waste arrives loose, in containers or on a conveyor. Compare the incoming shape and the next process with these catalogue choices:

  • Cutting configuration: see the -A and -B cutter references below.
  • Collection: the catalogue describes a manual collection box. For RG-36G, it also describes optional suction conveying and a cyclone arrangement. These involve different handling routines; identify the collection equipment in the quotation.

G-series structural details should be reviewed separately from the RG-E range. GJ denotes an electrical control configuration, distinct from the cutter arrangement. Identify the required control package in the quotation.

Prepare the comparison

Send the polymer, representative pieces, maximum dimensions, wall thickness and intended regrind use. For abrasive filled material, include the filler type and proportion so blade material and wear parts can be discussed before selecting the machine. The glass-filled plastic granulation guide discusses this material separately.

For bottle collection at a defined site, review the separate RG-1620SS bottle-unit reference and its operating requirements.

Questions about this equipment

What do -A and -B mean in the G-series cutter configuration?

In the published RG-26G / RG-36G catalogue, -A identifies a claw-type cutter arrangement and -B a flat-type arrangement. These suffixes identify the cutting configuration, rather than an electrical-control option. Keep the cutter designation with the machine reference when comparing equipment or replacement blades.

Need help selecting equipment?

Send your requirements or questions to RHONG.