Plastic machinery manufacturer
Ningbo, Chinasales@rhongplasticmachinery.com

RG-36P / RG-46P / RG-56P / RG-76P

Pipe and profile plastic granulator

A low, extended feeding route for long plastic pipes and profiles, with larger RGP configurations also described for bulky molded scrap.

Request a quote WhatsApp

Ask for the specification sheet for your configuration.

Applications

  • Long plastic pipes and profiles
  • Extruded sections and offcuts
  • Bulky scrap with a specified RGP configuration

Give long material a clear approach

The RGP pipe and profile ranges use a low feeding route and an extended hopper for long extruded material. Public sources name RG-36P, RG-46P, RG-56P and RG-76P. The pipe-specific feeding arrangement is the first point to compare with a general-purpose hopper.

Use the RGP project checklist to prepare the material and site information for a proposal.

Separate the feed path from chamber dimensions

The feed opening, usable material length and cutting chamber are different specification items. Review a drawing for the exact proposed variant before deciding whether long material needs preparation.

Catalogue descriptions include blade and screen access, outboard bearings and hopper-opening arrangements. Confirm whether the quoted hopper opens by a motor-driven or hydraulic mechanism, and provide the space needed for that movement.

Larger RGP applications

The RG-76120P catalogue also names pallets, drums and waste bins as applications to review against this configuration. Supply the actual part dimensions and material for review. If prior reduction is needed, evaluate the shredding stage and the final regrind requirement together.

Prepare an RGP quotation request

RGP project checklist (PDF). Download the checklist, fill in the project details and share it with your engineering team or RHONG.

RGP project inputs and quotation checks
ItemDetails
Your materialPolymer and grade; note fillers, reinforcement and contamination.
Your section geometryLongest length, cross-section, wall thickness, ribs and fittings; have photos ready.
Your feeding and floor spaceHow pieces will be supported and presented; approach route and available floor space.
Your workloadScrap per batch or shift, available granulation hours, arrival pattern and material changes.
Your regrind requirementIntended use, required particle size and acceptance criteria for fines or long pieces.
Your utilities and collectionElectrical supply and frequency, regrind collection point and dust-handling requirements.
RHONG’s proposalRHONG to confirm the exact variant; feed opening and cutting chamber separately; hopper-opening and service space; included feeding and collection equipment.

Questions about this equipment

Can the RGP range be reviewed for both PVC and PE pipe?

Yes. The RGP catalogue names PVC and PE pipes and profiles among its applications. This does not establish suitability for every grade or incoming condition: the actual section, wall thickness and fittings must be reviewed for the proposed machine.

How pipe and profile material enters the chamber

The published catalogue describes a specially designed cutter holder that draws pipe or profile material entering the hopper into the cutting chamber. This pull-in action is part of the cutter holder’s design. Distinguish this cutter action from any separately supplied upstream feeder in the proposed equipment list.

Need help selecting equipment?

Send your requirements or questions to RHONG.