RG-26E
General-purpose plastic granulator
Cut sprues, runners and production offcuts into regrind for a planned recovery process.
View details for RG-26E General-purpose plastic granulatorRG-2190QX / RG-21100QX
Inline granulation of thermoforming skeletons and sheet offcuts, with an integrated roll-feed route and enclosed machine body.
RG-21QX catalogue descriptions cover direct recycling of thermoformed sheet waste. An integrated roll-feed system draws the remaining web into the granulator, while a front feeding route accommodates material presented separately. The published construction has an enclosed body and access to the chamber through its middle.
Send photographs or a short sequence showing the skeletal web after formed parts have been removed. Web width, thickness and remaining shapes affect feeding. Include any unpunched start-up sheet or rejects that must enter the same machine.
Collected loose film and bags follow a different feed route: see the film granulator. For other continuous film or sheet webs, compare the roll-feed range. The feeding guide shows the three material presentations.
Describe line speed and whether waste arrives steadily or in repeated cycles. The roller controls and material take-off arrangement should be reviewed with the production line. The catalogue shows blower collection and a separate dedusting option; a cyclone used to collect regrind is not automatically a dust-filtering system.
The RG-21QY source describes an enclosed online arrangement with traction and an air-operated auxiliary roller. Its configuration should be specified separately from the named RG-2190QX and RG-21100QX variants. No motor, inlet or throughput values are transferred between them here.
Plan access for threading and clearing the feed route, opening the chamber and servicing blades. Identify the intended destination and acceptable use of the regrind before requesting a thermoforming recycling quotation.
The RG-21QX catalogue names PP, PE and PET sheet-edge waste. Treat these as listed applications, not approval for every grade or sheet condition. The actual resin, thickness, web shape and line speed still need to match the proposed feeding and cutting configuration.
The form of the incoming film determines the feeding discussion. Separate collected offcuts, continuous edge trim and a roller-fed web before comparing granulators.
Use the same material, output requirement and operating conditions when comparing machines. Start with the scrap that will actually reach the feed opening.
Send your requirements or questions to RHONG.